Cloud Connector & Battery Backup

Cloud Connector & Battery Backup - What's in the box?

IMPORTANT: Ensure that cloud connector is installed at least 18 inches away from the battery backup unit to avoid interference that will impact the performance of the cloud connector. Avoid installing Cloud Connectors near electronic equipment such as computers, printers and DO NOT install under countertops or inside of cabinets

Battery Backup

Includes battery backup unit & 2 power cords

Cloud Connector

Includes cloud connector (CCON), power cord (should be discarded), & hardware for wall/ceiling mounting.

Cloud Connector & Battery Backup - Location

Cloud Connectors should be installed high on a wall or on the ceiling to maximize the capacity of the device and avoid interference from other equipment or products in the store.

IMPORTANT: Ensure that Cloud Connectors are installed at least 12 to 18 inches away from the battery backup unit being installed to avoid interference that will impact the performance of the cloud connector. installing Cloud Connectors near electronic equipment such as computers, printers and DO NOT install under countertops or inside of cabinets

Good Location ✅

Cloud Connector is installed high on the wall and a minimum of 18 inches away from the battery backup

Bad Location ❌

Cloud Connector connection will be blocked by the computer monitor, printer and other electronic equipment

Claiming Cloud Connectors

Claiming is how newly purchased devices from DT are activated and added to the project.
IMPORTANT: All devices should be claimed before they are permanently mounted to a surface.

Install New Device

Once the correct store is selected, click the Install New Device button to begin.

Select Cloud Connector

Select the Cloud Connector Asset

Scan the QR Code

Scan the QR code on the back of the device. Once the code is scanned, click the continue button at the bottom of the screen

Add Location Information

Optional: Add a brief description of where the Cloud Connector is located to help someone find the equipment if it needs service. Click continue.

Success

The device will update configuration and show the image below when complete. Click install new device to select the next asset to install.

Installation

Cloud Connectors can be installed using the included mounting hardware or by utilizing the adhesive sticker on the mounting plate on a smooth, clean & dry surface.
IMPORTANT: All devices should be claimed before they are permanently mounted to a surface.

Plug one side of the AC power cord into the back of the battery backup and the other to the wall outlet. Press the power button on the battery backup to turn the device on. Plug one side of the the USB-A cord into the back of the battery backup and the other into the back of the CCON. Observe the status indicator light on the CCON (pictured below)

Report abuse